Filter
Top Products
INSTALLATION AND CONNECTION HVR-04E
(8) Select “Apply” using [▲/▼] button and press [EXIT] button. The HDD status is changed to “[R]”
after formatting.
(9) Shut down “Disk Manager” by pressing [EXIT] button.
15. Network Monitoring & Managing
HVR-04E can be accessed, controlled, and managed from remote site via Internet/Intranet.
15.1. Connecting Ethernet
1) Turn off HVR-04E’s power switch.
2) Connect HVR-04E to hub with Ethernet cable.
3) Turn on HVR-04E’s power switch.
<Note>
1. Supply power to HVR-04E after connecting Ethernet cable to protect against electrical damage to
HVR-04E.
2. Check cable connection status.
3. Check LED on HVR-04E’s rear panel after supplying power.