Filter
Top Products
TV OPERATION
23
Adjust the volume level by pressing the VOLUME + or –
button. The volume level will be indicated on the screen by
green bars. As the volume level increases/decreases, so
do the number of bars.
3
For proper operation, before selecting channels, they
must be set into the TV’s program memory, see page 20.
Press and release the CHANNEL + or – ❶ button. The TV
automatically stops at the next channel set into memory.
This will not operate if channels are not set into memory.
Direct Program Selection buttons (0 - 9, 100+)
Use these buttons to select a channel. The channel number
will appear at the top right corner of the screen.
• For Channels 1 through 9, press “0”, then 1-9 ❷ as
desired.
• For Channels 10 through 99, press the 2 digits in order.
• For Channels 100 through 125, press the -/-- button ❸,
then the remaining 2 digits.
1
2
1
3
4
Simply press the TV/CATV button to set the TV to TV or CATV (Cable TV) mode.
To change the type of cable (STD, HRC, IRC), simply change the TV/CATV
option under the TUNING menu.
2
Press the POWER button to turn on
the TV.
1
OPTIONS
TV: If using a
VHF/UHF
antenna.
CATV: If using Cable
TV.
NOTES:
• When TV/CATV is set to TV, only channels up to 69
can be selected. When set to CATV, channels up to
125 can be selected.
• The -/-- button is only used with CABLE.
• If an invalid channel is selected, the display will revert
to the original channel.
FAQs:
Why do I only receive 69 channels, when my cable goes much higher?
TV/CATV must be set to CATV when using cable, see step 2 above.
Why are some channels scrambled?
You must subscribe to these channels through your cable company.
When I press a button on the remote, the TV does not respond?
Refer to the FAQ’s on page 7. Make sure that you press the TV Function button to use the remote control to operate the TV.