Filter
Top Products
20
SETUP MENU (CONTINUED)
Use this option to turn the PCM down sampling On or Off.
Some amplifiers cannot support the high sampling rate of the
PCM signal. In this case, turn this option ON and the player
will output at 48kHz.
Select the Audio menu as shown on the previous page. Select
PCM DOWN SAMPLING using the Navigation (π,†) buttons
1, then press the Navigation (®) button 1; “ON” and “OFF’
will appear. Select ON to turn on this option or OFF to turn off
this option using the Navigation (π,†) buttons 1, then press
the ENTER button 2.
NOTE: Even when PCM down sampling is set to OFF, some
discs will show output down sampled audio through the
coaxial and optical digital outputs.
1
2
1
Use this option to turn the Dynamic Compression On or Off.
Dynamic compression means reducing the gap between the
loudest and softest sounds. This means you can listen at lower
levels.
Select the Audio menu as shown on the previous page.
Select Dynamic Range using the Navigation (π,†) buttons
1, then press the Navigation (®) button 1; “ON” and “OFF’
will appear. Select ON to turn on this option or OFF to turn off
this option using the Navigation (π,†) buttons 1, then press
the ENTER button 2.
NOTE: This option is effective only when the soundtrack is
encoded as Dolby Digital.
1
2
1
PCM DOWN SAMPLING
Use this option to turn on a speaker and to set the speaker
distances from the user.
Select the Audio menu as shown on the previous page. Select
Speaker using the Navigation (π,†) buttons 1, then press
the Navigation (®) button 1; the Digital Output options will
appear. Select one of the speakers ({C} Center, {L/R}
Left/Right, {SL/SR} Surround Left/Surround Right, {LFE}
Lower Frequency Effect) using the Navigation (π,†)
buttons 1, then press the ENTER button 2 to select. Press
ENTER button again to disable this function or use
Navigation (π,†) buttons 1 to highlight different speaker
setting option. Adjust the distance from the desired seating
area using the Navigation (√,®) buttons 1. When done,
press the RETURN button 3.
1
2
3
1
SPEAKER
DYNAMIC COMPRESSION
NOTES:
• Press the SETUP button to exit the Setup menus.
• Press the RETURN button to return to the previous setting.
General
Video
Audio
Language
Par ental
DigitalOutput
PCMDownSampling
DynamicCompression
Speaker
Selectthe digitalaudio outputconrector
General
Video
Language
Parental
AudioAudio