Memorex MVD4541 DVD VCR Combo User Manual


 
25
ENGLISH
Use the title, chapter and time recorded on the disc to
locate the desired point to play back.
To check the title, chapter and time, press DISPLAY. (see
page 30)
Press Number keys to change the number.
• If you input a wrong number, press CANCEL.
• Refer to the package supplied with the disc to check the
numbers.
1
Press JUMP during
playback or stop mode.
3
Press ENTER.
Playback starts.
• When you change the title, playback starts from
Chapter 1 of the selected title.
• Some discs may not work in the above operation.
4
2
Press or to select
the “Time”, “Title” or
“Chapter”.
Locating desired scene
1
Press MARKER
during playback.
2
Select the blank Marker
using / .
Then press ENTER at the desired scene.
Repeat this procedure to set the other 2 scenes.
3
Press MARKER to remove this display.
The unit stores the points that you want to watch again up
to 3 points. You can resume playback from each scene.
1
Press MARKER during
playback or stop mode.
Returning to the scenes
2
Press / to select
the Marker 1-3.
Marker 2
Marker 1
Marker 3
/Enter/Cancel/Marker
Marker 2
Marker 1
Marker 3
/Enter/Cancel/Marker
27
16
08
54
25
31
00
01
02
Marking desired scenes
3
Press ENTER.
Playback starts from the marked scene.
Marking the scenes
1
Press MARKER.
To cancel the mark
2
Press / to select the Marker 1-3.
NOTES:
Some discs may not work with the marking operation.
The marking is canceled when you
open the disc tray or turn
the power off.
Some subtitles recorded around the marker may fail to appear.
3
Press CANCEL.
To remove this display, press MARKER.
1
Press AUDIO during playback.
The current soundtrack lan-
guage will appear.
2
Press AUDIO repeatedly until the desired language is selected.
The on-screen display will disappear after a few seconds.
You can select the language when you play a multilingual
disc.
Changing soundtrack language
Turning the subtitles on and off
When playing back a disc recorded with subtitles, you can
turn the subtitles on or off.
Press SUBTITLE during playback until “Off”
appears.
Changing the subtitle language
You can select the language when playing back a disc
recorded with multi-lingual subtitles.
Press SUBTITLE repeatedly during play-
back until your desired language appears.
The on-screen display will disappear after
a few seconds.
Off
1/32 Eng
NOTES:
If the desired language is not heard after pressing the button
several times, the language is not recorded on the disc.
Depending on the DVD you may be unable to turn on, turn
off, or change the subtitles, even if they are recorded on the
disc. While playing the DVD, the subtitle may change while
opening or closing the disc tray, or while changing the title.
In some cases, the subtitle language is not changed to the
selected one immediately.
Subtitles
Disc playback operation
Time
Title
Chapter
/Enter/0 9/Cancel/Jump
/6
/
/
2F3P421A[E] (24-27) 1/25/05, 12:02 PM25