Filter
Top Products
ENGLISH
51
Timer recording does not
work.
Tune new channel.
Set Sleep Timer to "0".
Try another channel.
Check CATV connection of VHF/
UHF antenna, reposition or rotate
antenna.
Press the TV/CAP/TEXT button to
turn on the closed caption.
TV shuts off.
TV station stopped broadcasting.
Sleep timer is set.
TV station experiencing problems or
program tuned is not closed captions.
TV signal is weak.
The TV/CAP/TEXT button is not
depressed.
Noise bars appear on the
screen.
Aim the remote control at the
remote sensor.
Operate within 15 feet or reduce
the light of the room.
Clear the path of the beam.
Replace the batteries.
Insert correctly.
The remote control is not aimed at the
sensor.
Distance is too far or too much light in
the room.
There is an obstacle in the path of the
beam.
The batteries are weak.
The batteries are not inserted correctly.
11, 13
TV recording does not work.
The video cassette's erase prevention
tab is broken off.
The time is not set correctly.
The recording start/end time is not set
correctly.
The TIMER REC button has not been
pressed (the T-Rec indicator is not lit.).
Place a piece of vinyl tape over the
hole.
Reset the present time.
Reset the start/end time.
Press the TIMER REC button (the
T-Rec indicator is lit.).
—
Tape is old or worn.
Tracking adjustment is beyond range
of automatic tracking circuit.
Video heads are dirty.
Replace the tape.
Adjust tracking manually using the
SET/TRACKING +/– buttons on
the remote control.
Clean the video heads.
34
Closed caption is not
activated.
Remote control does not
operate.
52
SYMPTOMS
CAUSE
POSSIBLE SOLUTIONS
PAGE
RECORDING
PLAYBACK
REMOTE CONTROL
18
20
20, 21
18, 20
17
42, 43
43
36
10
10
10
10
10
FOR ADDITIONAL SET-UP INFORMATION OR CUSTOMER SERVICE
PLEASE CALL:
1-800-919-3647
545A201A-E/P40-53 17*04*0, 19*2951