Filter
Top Products
9. To test a new feature,press the component
key (e.g.,TV) that was learned once.
Then press the L key (e.g.,L1) where the com-
ponent’s feature was learned.
Deleting Functions From The L Keys:
1. On the remote control,press and hold SET until
the LED blinks twice,then release SET.
2. Enter 9 - 7 - 6.The LED will blink twice.
3. Press the component key once where the
learned feature to be deleted is stored (e.g.,TV).
4. Press the L key (e.g.,L1) to be deleted twice.The
LED will blink twice after the second press.
5. To clear additional functions stored on other
L keys,repeat steps 1 through 4.
3130
USING LEARNING KEYS
Use the learning keys (L1,L2,L3,L4) to add functions that
are unique to your home entertainment components
(e.g.,Tracking Up or Down for a VCR).
NOTE: Please have your original remote controls handy before
programming learning.Be sure to press each key within 10 sec-
onds of the previous entry.If not, the remote control will exit the
programming mode.
Programming The L Keys
1. On the remote control,press and hold SET until
the LED blinks twice,then release SET.
2. Enter 9 - 7 - 5.The LED will blink twice.
3. Press the component key once in which you
want to learn a feature (e.g.,TV).
4. Press the L key once (e.g.,L1) in which the
new feature is to be learned.The LED will
blink rapidly.
5. Place your original remote control head to head
(about 2" apart) from the One For All 4-Device
Video Expert Plus With Learning remote con-
trol.
6. On your original remote control,press and
hold the key (i.e.,feature) to be learned until
the LED on the One For All 4-Device Video
Expert Plus With Learning remote control
blinks twice.If the LED does not blink twice,
stop and repeat steps 1 through 5.
7. To learn functions on the other L keys, repeat
steps 3 through 6.
8. To lock in new feature(s) on the One For All
4-Device Video Expert Plus With Learning
remote control, press and hold SET until the
LED blinks twice,then release SET.
2"