Filter
Top Products
- 45 -
In Mode item there are five predefined and
one user defined options. These are User,
Classic, Jazz, Rock, Pop and Flat. The pre-
defined options can not be changed by the
user. If you want to change one of the fre-
quency values of the predefined options, the
Mode must be switched to User option.
The 5 items below the Mode are available to
adjust the sound settings in
5 frequency values: 120 Hz, 500 Hz, 1.5 kHz,
5 kHz and 10 kHz. To change the values of
5 frequency options, select one of the op-
tions by
or button, and then press
to increase the value, or to de-
crease the value. In mid position, cursor is
displayed with one arrow.
To store the Equalizer settings, press
or
button or directly press MODE button
on Store option.
During the store process all the items are
stored, moreover, the User mode informa-
tion would not be lost. In other words, when
the user mode is selected again, after stor-
ing the Mode with one of the predefined op-
tions, the user defined frequency values
would be set.
Setting AVL
Using
or button select AVL.
Pressing
or button will turn on and
off this feature.
Automatic Volume Limiting (Avl) function
normalises sound to obtain fixed output
level between programmes, having different
sound levels.
To Store the Settings
When the cursor is on any item which has
no sub-menu press MODE button on the
remote control to store the settings directly.
or,
Press
, or MODE button on Store
option to store Sound menu settings.
Picture Menu
To enter the Picture menu directly, press the
Green (
) button, or
Press "MENU" button, now you are in main
menu. In the Main menu, select Picture
using
or button, then enter the Pic-
ture menu pressing
/ or MODE
button.