Filter
Top Products
- 58 -
and stored the TV signals. See Install,
Search and Store TV channels. Store the
test signal under programme number 0.
Replace the aerial cable in the aerial
socket ANT of your video recorder once
you have stored the test signal.
Camera and Camcorder
To connect to (AV-3) input
Connect your camera or camcorder at the
back side of your TV.
Connect your equipment to the TV via VIDEO
(yellow), AUDIO R (red) and AUDIO L (white)
inputs. You should connect the jacks to the
input in the same colour.
Connect the decoder to the video
recorder
Some video recorders have a special
euroconnector for decoder.
Connect a eurocable to the euroconnector of
your decoder and to the special
euroconnector of your video recorder. See
also the handbook of your video recorder.
To connect your video recorder to the TV, see
TV and Video Recorder section.
If you want to connect more equipment to
your TV, consult your dealer.
Connecting Headphones
Use the stereo headphone socket on the
back side of your TV, to connect head-
phones.
Connecting the PC
Connect PC monitor with 15-pin PC cable to
the 15-pin connector on the rear of the com-
puter. For detail installation procedure see
Installation in PC mode.
To connect to S-Video input
Connect your camera or camcorder at the
back side of your TV.
Connect your equipment to the TV via S-
Video input at the back side by using S-
Video cables.