Filter
Top Products
Press this key on the remote
control....
The screen displays Explanation
26
7. AV recording
Video recorder ➜ video recorder
Example:
You wish to copy a film from video recorder 2 to the logic video recorder.
1. Call the AV menu
2. Select the desired AV device
(in this example:
video rec. 2)
3. Store the settings and
clear the menu
Output
LogicVTR
Video Rec.2
Decoder A
696+07A-GB
AV-recording
no recording
A
Device connection
Input
LogicVTR
Video Rec.2
Decoder A
Camcorder
Pr. 6: RTL 2
AV
?
MENU
return Help
TV
picture
696+07C-GB
AV-recording
Video Rec.2 ➜ LogicVTR
A
Device connection
Input
LogicVTR
Video Rec.2
Decoder A
Camcorder
Pr. 6: RTL 2
Output
LogicVTR
Video Rec.2
Decoder A
EURO2:
Video
EURO1:
Video
AV
OK
record ?
-
?
MENU
return Help
TV
picture
The copy operation with the selected devices is now
active.
If any subsequent switching operation could interfere
with copying, a warning box with the text „AV recor-
ding“ will be displayed and the requested switching
operation will not be executed.
To check the progress of the operation, press the
key to display the picture from the input device on the
screen.
If you wish to execute the copy operation in standby
mode, you can switch the TV set to this mode by pres-
sing the key.
When this setting is active, the programme position
must be selected again in order to display the TV
programme.
AV
4. Terminate or abort the
copy operation
TV picture
TV
OK
AV
OK
AV
After calling the menu, you must first select the input
device which is to supply the picture. In our example,
you select video rec. 2 by pressing the yellow key.
Once you have done this, the cursor moves to the out-
put side of the menu and the logic video recorder is
selected automatically, since there is no other choice.
If, however, there were a further video recorder
connected to the EURO 3 socket, you would have to
select the desired device with the related key.
yellow