Filter
Top Products
- 10 -
Setting Effect
You can use this feature to switch the sound
effect on and off. Pressing
or button
will turn on and off this feature. If the current
sound system is MONO and the sound ef-
fect is set ON, then the sound will be heard
as if it is STEREO. If the current sound sys-
tem is STEREO, switching this effect on will
make the sound deeper. Switching it off will
make no change in MONO and STEREO.
Equalizer
To enter Equalizer sub-menu, select Equal-
izer using P+ or P- button, then enter
Equalizer menu pressing
or button.
In MODE item there are five predefined and
one user defined options. These are USER,
CLASSIC, JAZZ, ROCK, POP and FLAT. The
predefined options can not be changed by
the user. If you change one of the frequency
values of the predefined options, the MODE
is switched automatically to USER option.
The USER option may be adjusted by the
user.
The 5 items below the MODE are available
to adjust the sound settings in
5 frequency values: 120 Hz, 500 Hz, 1.5 kHz,
5 kHz and 10 kHz. To change the values of
5 frequency options, select one of the op-
tions by P+ or P- button, and then press
to increase the value, or to de-
crease the value. In mid position, cursor is
displayed with the two reciprocal arrows.
To store the Equalizer settings, press
or
button on STORE option.
During the store process all the items are
stored, moreover, the USER mode informa-
tion would not be lost. In other words, when
the user mode is selected again, after stor-
ing the MODE with one of the predefined op-
tions, the user definde frequency values
would be set.
To Change Headphone Sound Settings
Pressing
or button on HEADPHONE,
enter the Headphone menu. This is a sub-
menu of Sound menu, and all options in this
menu are working as the same in the
Sound menu.
Setting Headphone Volume
As you enter the Headphone sound menu,
Volume will be the first selected option.
Press
button to increase volume.
Press
button to decrease volume.