I. Hardware Installation
1. Connect the power supply to the “Power” socket located at the back of EvolutionTV.
2. Connect the USB 2.0 cable provided from a USB 2.0 port of your computer to EvolutionTV.
II. Connecting your video source
1. Coaxial connection
If you receive TV channels via a roof-mounted antenna, an analogue cable service or a portable
antenna, you will most likely want to use the TV input on EvolutionTV.
Connect your coaxial cable as shown on the illustration below
AlchemyTV DVR™ User Guide
Page 5
Do not disconnect the power supply if the USB 2.0 cable is still connected.
Always first disconnect the USB 2.0 cable and then the power supply!
EvolutionTV
TV Coaxial
Aerial