Mitsubishi Electronics 164 Series Flat Panel Television User Manual


 
32 3. TV Features
For assistance call 1(800) 332-2119
Redirecting Audio Output
Selecting the Audio Output
Press
1.
AUDIO.
Press
2.
to show the TV
Speakers option.
Press
3.
to select either On (to
hear sound from the TV speak-
ers) or Off (to hear sound from
an external sound system).
Choose Center if using the
TV speakers to supplement
audio from an external sound
system. See page 28.
Disconnecting an A/V Receiver
When you disconnect an A/V receiver, change the TV
Speakers setting to On to hear sound from the TV
speakers. Use either the remote control’s
AUDIO
key or
the Sound > Audio > TV Speakers menu.
Using an External Sound System
Controlling A/V Receiver Sound Volume
Use one of the methods below to control sound volume from
an A/V receiver.
With a Standard TV Setup
Recommended Method:• Program the TV’s
remote control for your A/V receiver and enable the
Audio Lock feature. See page 74.
Program the TV’s remote control for your A/V •
receiver and set the control mode to
AUDIO
. Return
the control mode to
TV
to control the TV.
Use the remote control that came with the A/V •
receiver.
With HDMI Control (CEC-Enabled HDMI A/V
Receiver)
The TV’s remote control may control some functions of
the A/V receiver. See Appendix C, “HDMI Control of
CEC Devices,” page 81.
With NetCommand IR Control
265 Series. Set up NetCommand control of the A/V
receiver’s volume functions in the Inputs > AVR menu.
The TV’s remote will then control A/V receiver volume.
See page 68.
Downloaded From TV-Manual.com Manuals