Filter
Top Products
2. TV Menus 13
For assistance call 1(800) 332-2119
Picture 3 D Mode (642 Series only)
Source
Format
Off • Overrides the 3D processing of any HDMI 1.4a-compliant 3D signal and dis-
plays the signal in 2D instead.
• Allows access to some of the 2D picture adjustments that are hidden when the
TV’s 3D mode is set to Automatic.
Automatic • When the TV receives a 3D signal from an HDMI 1.4a-compliant device, forces
the TV automatically into 3D mode and selects the correct 3D format.
• When the TV receives a normal 2D signal, makes the TV automatically exit 3D
mode.
• Not effective with checkerboard 3D signals. Manually select Checkerboard
when needed.
Side-by-Side
Top/bottom
Checkerboard
• 3D format choices for use with 3D signals that are not HDMI 1.4a compliant.
• When the TV receives a 3D signal that is not HDMI 1.4a compliant, you
must manually select a 3D format here based on the type of 3D signal being
received.
• Return the TV to Automatic or Off at the end of the non-compliant 3D
program.
• If an HDMI 1.4a compliant signal is received, the TV will automatically override
any manual 3D selection.
2D+ Depth When active, generates a simulated 3D image from an ordinary 2D signal.
Glasses
Emitter
External
Standard,
Reverse
For use with an external emitter connected to the
TV’s
3D GLASSES EMITTER
jack.
Use the Standard or
Reverse setting to synchro-
nizes left/right images to
work with your 3D glasses.
Depth • Available only when Source Format is set to 2D+ Depth.
• Highlight the icon and press
ENTER
to display the adjustment screen.
• Allows adjustment of the 3D effect from a flatter image to one with more depth.
DLP Link
Standard,
Reverse, Off
• For use with DLP Link.
• Select the Off setting if you are not using DLP
Link glasses.
Use the Standard or
Reverse setting to synchro-
nizes left/right images to
work with your 3D glasses.
Picture, continued
Notice Concerning Format Compatibility
The Mitsubishi TVs will support the mandatory HDMI
1.4a 3D signals intended for the United States. Spe-
cifically, the TVs will support the 3D signals known as
Frame Packing 1080p@24 Hz and 720p@60 Hz (primar-
ily from Blu-ray players and gaming consoles), Side-
by-Side(Half) 1080p@24/30/60 Hz, 1080i@60 Hz, and
720p@60 Hz, Top-and-Bottom 1080p@24/30/60 Hz
and 720p@60 Hz, and Checkerboard 1080p@60 Hz.
However, there may be some 3D sources that are not
compatible with the TVs. In all cases: (1) 3D sources
must connect to the TVs using the HDMI inputs, and (2)
Active Shutter 3D glasses with matching synchroniza-
tion emitter or DLP Link Active Shutter 3D glasses are
required in order to view 3D content.