Filter
Top Products
86
Connections
• To connect a PC to this recorder directly, use a cross
cable. To connect them via a hub, use a straight cable.
• For the procedure for making Web settings of the PC,
refer to the PC's instruction manual.
• The service port for Web communication is set to
"00080" by default.
Login
Start Microsoft Internet Explorer and log in.
Step
1 Start Microsoft Internet Explorer and enter the IP
address of the recorder in the address box.
•
Enter the IP address set on the <LAN settings>
screen (
page 114). The default IP address is
"192.168.0.100."
•
The [Login] screen appears.
Step
2 Enter the user ID and password.
•
A full-rights user (user ID: "root" password:
"admin000") and a live user (user ID: "guest"
password: "guest") have been registered as factory-
preset users.
Notice
• More than one user can log in simultaneously using
the same user ID and password.
• Available functions vary depending on the user's
authorization.
• Depending on the settings of recording, copying,
motion detection, etc., a heavy load is imposed on
the recorder's internal processing. Due to this, the
recorder may not be able to communicate with the PC
smoothly or its operation may become slow. In this
case, reduce the load on the recorder.
Step
3 Select [login].
•
The [Main Menu] screen appears.
Notice
• If you enter a wrong user ID or password, an [Caution]
screen appears. In this case, select [Login] to go back
to the [Login] screen and then enter the correct user
ID and password.
•
If you do not log in, log out using the following procedure.
1 Select "If you won't log in, please go to Logout."
•
A message saying "Session ID removed from
recorder & browser. Please close the browser." is
displayed.
2 Exit the Web browser.
Notes on the Main Menu
Using the Main Menu, you can perform the following
operations.
•
[Live Monitoring]: You can load and display live
images.
•
[Playback]: You can load and play back recorded
images.
•
[Configuration Menu]: You can configure certain
recorder settings.
Notice
• Depending on the user's authorization, some menus
are not selectable.
• User session ID (connection information) is lost in
10 minutes after the last communication including
loading images. If request for data is not made from a
client PC for 10 minutes, you cannot perform further
operations. In this case, exit the Web browser and log
in again.
• When the MAIN switch of the recorder is set to OFF,
you cannot load live images and recorded images.
Using the communication functions (continued)