Filter
Top Products
3
Beginning
Setup procedure
1
4-1
2
4
3
6
4-2
5
Start here when you change
the settings of the
recorder already set up.
Start here when you first
set up the recorder.
Connect the recorder.
Connect the cameras, monitors, and sensors to the recorder. Configure the settings of the connected devices referring to the
reference pages shown in the descriptions of the devices in "Connections" on page 24.
Set the items shown above according to the displayed menus.
Turn on the recorder.
Turn on the main switch on the rear of the recorder. After checking the ACCESS indicator goes out, press the POWER button
on the front panel of the recorder.
Make the minimum required
settings manually.
Select whether or not to use the Setup Wizard.
Run the Setup Wizard.
When you turn on the recorder first time, the Setup Wizard is activated. "Setup Wizard" on pages 34 and 35.
Using the Setup Wizard, you can set the following items automatically according to the displayed menus.
Language setting
The language used for the menu screen is selected.
Clock setting
HDD configuration
All the connected HDDs are registered as Main device. For details of the HDD configuration, see pages 36 to 39.
Recording setting
The settings for normal recording are configured. For details of the recording, see pages 48 to 59.
Change the settings made by the
Setup Wizard.
To manually change the settings made by the Setup Wizard:
Language setting
Clock setting
HDD configuration
Recording setup
When using the
Setup Wizard
When not using the
Setup Wizard
(To change the
settings made by
the Setup Wizard)
As
needed
As
needed
Make other settings.
Make the necessary settings according to your desired recording operation.
For example,
To carry out timer recording. Timer program setting pages 66 to 69
To use the mirroring mode. Mirroring setting page 37
To control the recorder from the personal computer. Communication setting pages 114 and 115
To control the camera. PTZ camera setting page 116
To restrict the recorder's functions by the password lock. Password setting pages 117 to 120
To make settings of screen display and rear terminals. Setup menu pages 98 to 116.
Check the setup condition.
By executing recording, playback, search, and copy, check that the recorder has been set up correctly.
How to search for necessary settings
Refer to "How to locate setting items" on the left
page, and find the pages describing the
functions and settings you want to use and
configure the necessary settings.
Page 105
Page 105
Pages 48 to 59
Pages 36 to 39
Language setting
Clock setting
HDD configuration
Recording setup
Page 105
Page 105
Pages 48 to 59
Pages 36 to 39