109
Others
Step
2 When you enable [Recorder title] in step 1, set
the recorder title.
•
When you select [Setting], the screen for setting the
recorder title is displayed.
Tips
• For an example of screen display, see page 22.
• The recorder title is displayed at the top of the
operation mode display.
• You can set the recorder title via the Web function
using a personal computer. (
Page 91)
Step
3 Enter the recorder title using the characters
displayed on the screen.
Camera number and title display
You can set a title for each of the connected cameras. By
setting the camera display mode to [Title], you can confi gure
an easy-to-view monitoring system where the locations of
the cameras are displayed as camera titles.
Step
1 Select the display mode of the camera
information.
[Number]: The camera numbers are displayed.
[Title]: The camera titles you set are displayed.
Camera titles can be recorded together with images.
[Off]: Nothing is displayed.
Step
2 Select the display position.
•
With the display mode set to [Title], the titles are
displayed at the top when you select [Upper left]
or [Upper right], and at the bottom when you select
[Lower left] or [Lower right].
Step
3 Select [Setting] of the camera of which title you
want to set.
•
The screen for setting the camera title is displayed.
Step
4 Enter the camera title using the characters
displayed on the screen.
Tips
• You can set the camera titles via the Web function
using a personal computer. (
Page 91)
• Up to 16 characters can be used for the title.
The number of characters displayed on the screen is:
1/16-screen: Up to 10 characters
1/9-screen: Up to 14 characters
1/4-screen: Up to 16 characters
Single screen: Up to 16 characters
Use the transparent menu
You can make the screen menus transparent.
Step
1 Select whether or not to make the menus
transparent.
[Use the transparent menu]: With the box checked,
the displayed menus are made transparent and you
can view images from cameras through the menus.