19
Beginning
31 TRIPLEX PB button
When this button is pressed while live images from
cameras are being displayed in the split display mode,
the playback image of your desired camera can be dis-
played. Triplex playback is possible with Output A only.
DIGITAL ZOOM button
When this button is pressed in the single screen dis-
play mode or the single screen playback mode, the
displayed image is enlarged. To move the magnifi ca-
tion center point, press the camera number button (11,
14, 15 or 16).
32 BOOK MARK button
When this button is pressed, <Bookmark menu> is
displayed. When the playback device is designated
as Copy device, Archive device, or preliminary area,
<Bookmark menu> is not displayed. (
Page 79)
33 Operation buttons
STOP button
Press this button to stop playback.
PAUSE/JUMP TO END button
When this button is pressed during playback, still im-
age playback starts and the button illuminates. When
this button is pressed again, playback starts and the
button goes out. When you press this button during
shuttle playback, the playback continues at the then
playback speed even when you release the shuttle.
(Shuttle hold)
When the PAUSE/JUMP TO END button is pressed
while the playback is stopped, images around the end
of the latest recorded data are played back in the still
image playback mode. (End point search)
REV.PLAY button
When this button is pressed, this recorder starts re-
verse playback and the button illuminates.
PLAY button
When this button is pressed, this recorder starts play-
back and the button illuminates.
SPEED (+ and -) buttons
When the playback (+) button or reverse playback (-)
button is pressed during playback or reverse playback,
the playback rate is changed.
Inserting or removing DVD/CD disc
Step
1 Press the OPEN/CLOSE button.
•
The disc tray opens.
[To insert the disc]
Step
2
-1
Place the disc on the tray.
•
Place the disc to the proper position with the label
side up.
[To remove the disc]
Step
2
-2
Remove the disc.
Step
3 Press the OPEN/CLOSE button.
•
The disc tray closes.
Notice
• Before you use a disc, read the cautions and
instructions on its use given in its manual.
• Do not remove the disc during copy, during saving/
loading menus, or immediately after inserting the disc.
The disc or data may be damaged.
• Use recommended discs. Data may not be written
or read properly when you use discs other than
recommend.
For usable discs, contact your dealer.
• When you use used DVD-RW or CD-RW, fi rst delete
the data from it using [Data clear]. (
Page 122)
• With the special PC viewing/communication software,
you can play data copied to a DVD or CD using this
recorder. However, it is not guaranteed that they can
be played by all types of personal computer or DVD/
CD drive.
• To play on the personal computer, check whether the
DVD/CD drive on the personal computer supports the
media to be used. To play on the personal computer,
you are recommended to use the DVD-multi drive.
• When you cannot remove the disc, stop recording, turn
off the MAIN switch on the rear panel of the recorder,
and then turn on the power again.