Mitsubishi Electronics DX-TL5716U DVR User Manual


 
97
Communication
Notice
The image data uploaded upon FTP notification is
slightly delayed from the actual start point of alarm
recording.
The size of image data uploaded per noti cation is 2
MB.
Do not connect such a device as receives input signals
frequently to the rear terminals that receives trigger
for FTP notification. During issuance of notification,
another noti cation is not issued even when a trigger
signal is input. When FTP notification is issued
frequently, operations of the communication functions
may be impaired.
• E-mail noti cation is triggered only by the ALARM IN
terminal and EMERGENCY terminal on the rear panel.
To issue the notification, set the desired camera for
alarm recording or emergency recording. (For setting,
see pages
54 to 61.)
The recorder cannot notify multiple events at the same
time. The recorder doesn't notify another event that is
input during issuance of noti cation (during uploading
data).
• The le structure of data uploaded to the FTP server is
as follows.
To distinguish recorders, you are recommended
to make folders with a name including respective
recorders' name on the FTP server in advance and to
set so that the following folders are saved in them.
Folder "YYYYMMDD"
|
Folder "hhmmss-Ch"
|
File "CBL000.dat"
The FTP server connection function of the recorder
does not support all types of FTP server.
Communication by the viewing/
communication software
You can use the following functions using the special PC
viewing/communication software.
Loading live images and audio
Searching recorded images
• Section download • Recorder control
Recorder setting • Receiving IP noti cation
Playing back recorded images and audio
Refer to the instruction manual of the special PC viewing/
communication software for the details of the functions and
their usage. The instruction manual is added to the Start
menu when the software is installed.
E-mail noti cation
This recorder issues e-mail notification of operation
errors and recording status. You can combine notified
events such as operation errors and recording status, and
noti cation can be sent to up to 3 e-mail addresses. Use
the Web browser or the special PC viewing/communication
software to enable this function. Authentication for e-mail
transmission supports POPbeforeSMTP and SMTP_AUTH
(CRAM_MD5).
Notice
Do not select events that frequently occur as e-mail
noti ed events. Events that frequently occur may not
be always noti ed.
The e-mail transmission function of this recorder does
not support all e-mail servers.
Image attached to e-mail is in general JPEG format.
When the recording rate is extremely high, image
cannot be attached to e-mail due to restrictions on the
compression circuit. To attach an image to e-mail, the
total recording rate of the recording settings should be
set to three-quarters or less of the maximum value.
One of alarm-recorded images or emergency-recorded
images of the camera corresponding to the terminal
(ALARM IN or EMERGENCY) that receives a trigger
signal is attached to e-mail.
To attach an image, select [Alarm].
When multiple events to be noti ed occur at the same
time, notification may be delayed or some of the
events may not be noti ed.
When multiple alarm signals are received at the same
time, only the image from the camera corresponding
to the sensor having the smallest sensor number is
attached to e-mail.
Loading of live images may be interrupted for a
moment while notification with an image attached is
being issued.
Image is attached to e-mail at least 3 seconds after
the issuance of the previous noti cation with an image
attached.
• When noti cation to be issued with images occur quite
frequently or when it takes time to transmit data to the
e-mail server, the maximum number of e-mail text to
be saved is 100 and that of attached images is 32.
FTP noti cation
This recorder can upload images to the FTP server when a
signal is input to the rear terminals. A date folder and a time
folder are automatically created on the FTP server and data
are uploaded to those folders. Use the Web browser or the
special PC viewing/communication software to enable this
function. You can play back the data uploaded to the FTP
server using the special viewing/communication software
DX-Viewer. To play back the data, save the downloaded
CBL000.dat le in the ARE00000 folder.