Filter
Top Products
93
Communication
[Picture]: With this option selected, e-mail
notification is sent to the recipient together with
an image captured at the start of alarm recording
as attachment. To use this function, see "E-mail
notifi cation" on
page 97.
[Test Mail]: When you select [send], test mail is sent
to the selected recipient.
Notice
• Images detected by the same sensor may not be
attached to the e-mail notification messages unless
an interval of at least 5 seconds is given between
transmissions of the messages. Without the interval,
only the notification messages may be e-mailed. In
addition, even images detected by different sensors
may not be attached and only the messages may be
e-mailed unless an interval of at least 3 seconds is
given.
• Against failure of message transmission and
undelivered messages, the e-mail function of this
recorder has been designed to implement measures
such as saving e-mail messages temporarily and re-
sending them. However, when a heavy load is applied
to the recorder because of high-quality and high-rate
recording or when the communication line is busy or it
has a problem, the recorder may not be able to notify
of all the detected events. Consider this matter when
incorporating the recorder into an alarm reporting
system or other similar system.