Filter
Top Products
Chapter 1. Television Overview 19
4. AVR OUT
(Audio only)
AVR OUT
(AUDIO/ViDEO RECEIVER OUT) L/R jacks
send analog audio of the program currently shown on
the screen to an A/V surround sound receiver or stereo
system. Digital audio from digital channels, FireWire®
(DTVLink/IEEE 1394) devices and HDMI devices is con-
verted to analog audio by the TV. If using an analog A/V
receiver or stereo system, this is the only audio connec-
tion needed between it and the TV.
5. MONITOR OUTPUT
Use these composite video and left/right audio jacks
to send analog video and audio signals to an external
recording device such as a VCR. The signals from these
jacks are from the program currently being viewed on the
TV screen. To make recordings from this output, the
TV must be in normal full-screen mode rather than in
Split-Screen mode.
• From this output you can record audio and video
signals from
ANT 1
,
ANT 2
,
INPUT 1-3
, and
IEEE 1394 devices.
• Digital signals from
ANT 1
,
ANT 2
, and IEEE
1394 devices are converted to analog video and
audio signals.
• Some signals cannot be recorded because of
copy-protection flags in the content.
• Video signals from devices connected to
COM-
PONENT 1 & 2
,
HDMI 1 & 2
or
PC DVI
are
not available from these
MONITOR OUTPUT
jacks.
6. HDMI/DVI AUDIO
Audio for HDMI 1 & 2: Use these analog audio inputs
when connecting DVI devices to the TV’s
HDMI
jacks.
Unlike HDMI, DVI does not carry audio information on the
same cable. For analog audio from a personal com-
puter, use the PC-DVI AUDIO jacks instead.
Back and Side Panels, continued
Back Panel 1
Back Panel 2
ANT 1/MAIN
(Located next to DIGITAL
AUDIO OUTPUT jack)
9
8
1
10
4
7
2
3
6 5
ANT 2/AUX