Filter
Top Products
Chapter 2. TV Connections 27
Wall Outlet Cable (no cable box)
(can be used with a CableCARD™)
It is very important to connect the incoming cable for your
primary viewing source to
ANT 1/MAIN
, especially for
CableCARD™ use.
1. Connect the primary incoming coaxial lead cable to
ANT 1/MAIN
on the TV back panel.
2. For an optional secondary antenna source, connect
an antenna (or cable) to
ANT 2/AUX
.
3. If you have subscribed to a CableCARD™ service,
Insert the CableCARD into the CableCARD slot. The
top of the card must face in the direction indicated by
the
CARD TOP
arrow.
See chapter 1, “Television Overview,” for additional
CableCARD information.
Figure 6. Wall Outlet Cable
Note: ANT 1 is located behind ANT2 when you are
facing the back of the TV.