Mitsubishi Electronics LX42C4 Universal Remote User Manual


 
81
APPENDICES
A
Appendix 1 Optional Items
Appendix 1.1 Connector/terminal block converter modules
APPENDICES
Appendix 1 Optional Items
Appendix 1.1 Connector/terminal block converter modules
(1) Included item
(2) Applicable connector/terminal block converter modules for the I/O modules
*1 Applicable only when using the positive common type module.
The number of connectable I/O points is 32 for all connector/terminal block convertor modules.
Therefore, two connector/terminal block convertor modules and two cables is required for the 64-point I/O module.
Tighten the module terminal screws within the following torque.
Terminal screw (M3.5)  Tightening torque 0.78Nm
Model Name Description Weight Applicable wire size Applicable solderless terminal
A6TBXY36
For positive common type input module and
sink type output module (Standard type)
0.4kg
0.75 to 2mm
2
1.25-3.5(JIS)
1.25-YS3A
V1.25-M3
V1.25-YS3A
2-3.5(JIS)
2-YS3A
V2-S3
V2-YS3A
A6TBXY54
For positive common type input module and
sink type output module (Two-wire type)
0.5kg
A6TBX70
For positive common type input module
(Three-wire type)
0.6kg
Product name Description Quantity
Screws (M4 × 25) Used for installing connectors/terminal block converter modules on the control panel. 2
Name Model Name A6TBXY36 A6TBXY54 A6TBX70
Input module
*1
LX41C4
LX42C4
Output module
LY41NT1P ×
LY42NT1P ×
LY41PT1P ×
LY42PT1P ×
I/O combined module
LH42C4NT1P
Input side
*1
Output side ×
LH42C4PT1P
Input side
*1
Output side ×