Mitsubishi Electronics MC 200 CRT Television User Manual


 
8
MC200 Series Industrial Panel Computers MAN-PNLPC-001
COMPUTER SPECIFICATIONS
CPU Type: 700 Mhz Intel Celeron Processor
Memory: 128 MB minimum (expandable up to 512 MB)
BIOS: Flash ROM
SSD: Optional — Disk On Chip 32 MB minimum (up to 256 MB)
Drive: 40 Gb Hard Drive
Serial Ports: 1 dedicated RS-232 port, 1 RS-232/RS-422/RS-485 port
Parallel Port: SPP/EPP/ECP supported (configurable to LPT1)
CD ROM: Optional — external CD ROM drive (through USB port)
LAN: 32-bit PnP Ethernet controller 10 Base-T/100 Base-TX (RJ-45)
USB: 2 Ports (1.1 compliant)
PS/2 Interfaces: 1 Mouse, 1 Keyboard
Floppy DD: Optional external Floppy Disk Drive (through USB port)
Operating System: Windows XP/e (embedded) (Standard)
Watchdog Timer: 12 level timer with timout intervals from 0.5 – 30,000 seconds
DISPLAY SPECIFICATIONS
Display: MC220: 10.4" TFT Flat Panel MC240: 12.1" TFT Flat Panel
MC250: 15.0" TFT Flat Panel
Touch Screen: Analog Resistive Type
View Angle: U/D: 150, R/L: 120
Screen Pixels: MC220/MC240: SVGA 800 x 600 MC250: XGA 1024 x 768
Display Brightness: MC220: 230 nits MC240/MC250: 250 nits
Backlight Bulb Life: MC220: 20,000 hours MC240: 40,000 hours MC250: 35,000 hours
(manufacturer’s expected half-life rate)
VGA Output: XGA Output (60 ft. maximum)
MECHANICAL SPECIFICATIONS
Housing Material: Stud Mounted Metal Bezel — MEAU Black
Connectors: COM1 and COM2 D-SUB 9-pin male Serial Ports, LPT1 D-SUB 25-pin
female Parallel Port, Two P/S 2 Ports, One RJ-45 for Ethernet, One D-SUB
15-pin female Video port, Two USB ports (1.1 compliant)
Dimensions: MC220/240: 11.00” x 13.00” x 6.928” (279.40 x 330.20 x175.971 mm)
MC250: 12.50” x 16.250” x 7.750” (317.50 x 412.750 x 196.850 mm)
Weight: MC220/240: 7.0 kg MC250: 8.0 kg
Expansion Slots: 3 PCI slots for I/O cards
PCMCIA: Optional (type 2) (uses one PCI slot)
Power Supply: 115/230 VAC @ 50/60 Hz, ATX 145 Watts
Cooling Fan: Optional
Environmental: NEMA 4/4X (indoor use only)
Temperature: Operating — 0 to 50° C; Non-operating —20 to +60° C
Relative Humidity: 10 to 95% noncondensing
Agency Approvals: UL/CUL , CE Mark, FCC compliant
3 SPECIFICATIONS