Filter
Top Products
–
16
–
EN
1L25
STEPPING THROUGH FRAMES
1 Press the PAUSE/STEP button while
playback is paused.
¡
The next picture frame is
displayed with sound muted each
time the button is pressed.
2 Press the PLAY button to resume playback.
Note
¡This machine is not available with a step-back function.
VCDDVD-V
k
B
RESUMING PLAYBACK FROM
THE POINT WHERE
PLAYBACK STOPPED
1 Press the STOP button during playback.
¡
Playback will stop, and then the resume message
will appear at the center.
2 Press the PLAY button. Playback will start
from the point where the previous playback
session was stopped.
Note
¡The resume function can be reset by pressing the
STOP button twice or by opening the disc loading
tray.
¡Some Video CDs with PBC function resume
playback from the beginning of the track.
¡The “Resume” information stays in the memory
even when the power is turned off.
VCD ( )CDDVD-V
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'
Resume ON
B
1 Press the FWD g or REV h button
during playback.
¡
For DVDs, pressing the FWD g or REV h
button cycles the playback speed in four steps. In
case of DVDs, the sound will mute.
¡For audio CDs, the playback speed is ×16 fixed.
¡For Video CDs, the playback speed is ×2, ×8 and
×30.
¡For WMA and MP3, the playback speed is ×8 fixed.
2 Press the PLAY button to return to normal
playback speed.
WMAMP3VCDCDDVD-V
FAST FORWARD/REVERSE
REV h button FWD g button
without PBC
function