Mitsubishi Electronics DD-6040 DVD Player User Manual


 
20
EN
1L25
PROGRAM (Audio CD)
1
Press the MODE button in stop mode.
¡The program screen will appear.
CD
1/11/3
CD [AUDIO] TOTAL 0:00:00
PROGRAM
ENTER
PLAY
CLEAR
2 5:02
3 1:22
4 4:35
5 3:49
6 3:05
7 4:18
2 Press the numeric buttons to enter the
desired track numbers.
¡
50 programs can be displayed
at once on the screen. Press
Gto go to the next page.
3 Press the PLAY button.
¡
Playback will start in the programmed order.
¡While the program is being played back, the STOP
button works as follows:
Press the STOP button once and then the PLAY
button again, and playback will restart from the
point where the STOP button was pressed (Program
continued).
Press the STOP button twice and then the PLAY
button again, and playback will restart from the
track in the usual way (Program cleared).
Notes
¡Adding programs is not possible during program
playback. You must stop the current playback before
such operations can be carried out.
¡Press the CLEAR button to cancel a program. The
most recently entered program will then be deleted.
¡Up to 99 programs can be entered.
¡Playback from a desired track and random playback
are not available during program playback.
¡Program settings are cleared when the power is
turned off or the disc loading tray is opened.
ENTER
PLAY
CLEAR
2 5:02
4 4:35
3 1:22
4 4:35
5 3:49
6 3:05
7 4:18
3 1:22
1/12/3
CD [AUDIO] TOTAL 0:04:35
PROGRAM
ZOOM PLAYBACK
(enlargement on-screen)
Images can be enlarged on the screen to your taste.
1 Press the ZOOM button during playback.
¡
An image will be enlarged at the center of the
screen.
¡Pressing the ZOOM button cycles the zooming
images in three steps.
VCDDVD-V
×4
×2×1.3
2 When the Arrow (K/L /s / B ) button is
pressed during zoom play, the part to be
zoomed moves.
¡
The zooming frame can be moved from the center 4
steps to the right, 4 steps to the left, 4 steps to the
top, and 4 steps to the bottom when 2 time zooming.
The frames will move 6 steps when 4 time zooming.
(In the 1.3-time zoom display, just one step can be
shifted up and down as well as right and left.)
¡Current position will be displayed on the right
bottom of the screen. Press the ENTER button, and
the display disappears.
Notes
¡Zooming function does not work while disc menu is
shown.
¡×4 zoom is not available on some discs.
¡For Video CDs, only 2 times zooming is available.