Mitsubishi Electronics DD-6050 DVD Player User Manual


 
This machine can reproduce images and sounds from
data recorded in MP3 and JPEG formats on CD-
ROM, CD-R and CD-RW discs.
The machine can also run Picture CD by Kodak Inc.
The user can enjoy picture images on their television
set by Picture CD playback.
* Picture CD is a service that converts photograghs
taken by conventional film camera into digital data
and writes the data on a CD.
For details on Picture CD, contact a shop that deals
with the developing service of Kodak Inc.
Picture CDJPEGMP3
21
EN
1L25
PLAYING MP3 / JPEG IMAGE
AND PICTURE CD
Information on MP3 and JPEG files
¡This DVD player can play back images and sounds
from data recorded in MP3 and JPEG formats on
CD-R and CD-RW discs.
¡A file with an extension of ".mp3 (MP3)" is called
an "MP3 file".
¡A file with an extension of ".jpg (JPG)" or ".jpeg
(JPEG)" is called a "JPEG file".The DVD player
can run an image file conforming to the Exit
specification. Exit is a file format, Exchangeable
Image File format established by Japanese
Electronic Industry Development Association
(JEIDA).
¡Files whose extension is other than ".mp3 (MP3)",
".jpg (JPG)" and ".jpeg (JPEG)" will not be listed
in the MP3 or JPEG menu.
¡If the file is not recorded in MP3 or JPEG format,
noise may be produced even if the file extension is
either ".mp3 (MP3)", ".jpg (JPG)" or ".jpeg
(JPEG)".
¡The name of group and track can be displayed in up
to 25 characters. Unrecognizable characters will be
replaced with asterisks. The ninth and deeper
hierarchies cannot be displayed.
¡Unplayable groups or tracks may be displayed
depending on the recording conditions.
¡If the TITLE button is pressed when a file list is
displayed, the first item will be highlighted.
1 Insert a disc and press the MENU button.
For discs on which MP3 or JPEG tracks are
recorded:
¡An MP3 or JPEG track menu screen appears.
¡A symbol of “ ” is shown on the top of the group
name.
¡A symbol of “ ” is shown on the top of MP3 files.
¡A symbol of “ ” is shown on the top of JPEG files.
¡If the picture extends beyond the scope of screen, a
down arrow “L” appears, indicating that the user
can view another part of the picture on the next page.
If an up arrow “K” appears, it indicates that the user
can view another part on the previous page. The
current page number and the number of total pages
are shown on the right of the down arrow “L”.
¡The system can recognize up to 255 groups (or
folders) and up to 512 tracks. (This applies to the
case where mixed MP3 and JPEG files are
recorded.)
¡If no MP3 or JPEG files are found in the group, the
group is not displayed.
¡The machine can reproduce data recorded as per ISO
9660 Level 1, Level 2 or Joliet on the disc.
¡It can also run a disc on which data is recorded in a
multi-session.
¡For more details of recording systems, see the
instruction manual for the CD-R / CD-RW drive or
the writing software.
Applicable MP3 file Remarks
Sampling
frequency
44.1kHz
48kHz
• It is prohibited to record
MP3 sound on a digital
device when connection is
made digitally.
Type
MPEG1
audio layer 3
MP3 files recorded at constant
bit rate of 128 kbps or higher
are recommended.
Applicable JPEG file Remarks
Size of
image
Upper limit:
6300
×5100 dots
Lower limit:
32×32 dots
• A JPEG image that extends
beyond the screen is
reduced so that it will be
displayed within the screen.
Slide show mode switching of JPEG, Picture CD
This machine can switch the slide show modes.
1 Press the MODE button during JPEG or
Picture CD playback
.
¡The slide show mode screen appears.
¡The slide show mode cannot be switched when it is
stopped, or from the file list screen or the Picture
CD menu screen.
2 Press the ENTER button.
¡The slide show mode will change.
1: CUT IN/OUT: The entire image appears in one time.
2: FADE IN/OUT: The image appears gradually and then
disappears.
3
Press the MODE button to get out from mode.
CUT IN/OUT
E5931UD_2çZ.qxp 04.2.26 13:24 Page 21