Filter
Top Products
–
24
–
EN
1L25
SETTINGS
CHANGING THE AUDIO
LANGUAGE OR SOUND MODE
This DVD player has a function which allows you to
select the desired audio language and sound mode.
For DVDs
Press the AUDIO button during playback, and then
press the AUDIO button to select the desired audio
language.
¡The audio language can be changed if multiple
languages are recorded on the DVD being played.
CDDVD-V
Notes
¡Pressing the AUDIO button may not work on some
DVDs with multiple audio languages (e.g. DVDs
which allow audio language setting on the disc
menu). Operation varies between discs, so refer to
the manual accompanying the disc.
¡Current audio language and sound mode will be
displayed when you press the AUDIO button at first.
¡If a desired language is not shown after pressing the
AUDIO button several times, the disc does not have
an audio source in that language.
¡If you choose a Language that has a 3 letter language
code, the code will be displayed every time you
change the Audio language setting. If you choose
any other languages, ‘---’ will be displayed instead.
(Refer to page 30.)
¡The audio language resets to the one which has been
selected in the setup mode, every time the power is
turned on or discs are replaced. If that language is
not available on a disc, a language defined by the
disc is selected.
¡The screen display will disappear after about 5
seconds.
¡DTS CD does not allow the user to switch the sound
mode.
¡The Audio language cannot be changed during
Speech Control (Refer to page 29).
1 ENG
2 FRE
3 JPN
DolbyD 3/2.1ch 48k/3
DolbyD 3/2.1ch 48k/3
DolbyD 3/2.1ch 48k/3
HELLO
Bon jour
For audio CDs
Press the AUDIO button during playback.
¡Pressing the AUDIO button cycles the sound mode
through STEREO, L-CH and R-CH.
STEREO
L-CH
R-CH
E5931UD_2çZ.qxp 04.2.25 6:00 PM Page 24