–
20
–
EN
1L25
PROGRAM
1
Press the MODE button in stop mode.
¡The program screen will appear.
CD
1/11/3
CD [AUDIO] TOTAL 0:00:00
PROGRAM
ENTER
PLAY
CLEAR
2 5:02
3 1:22
4 4:35
5 3:49
6 3:05
7 4:18
2
Select a track using K/L
buttons, then press the
ENTER button.
3 Press the PLAY button.
¡Playback will start in the programmed order.
¡
While the program is being played back, the STOP button works
as follows:
Press the STOP button once and then the PLAY
button again, and playback will restart from the point where the
STOP button was pressed (Program continued).
Press the STOP button twice and then the PLAY
button again, and playback will restart from the track in the
usual way (Program cleared).
Notes
¡Adding programs is not possible during program
playback. You must stop the current playback before
such operations can be carried out.
¡Press the CLEAR button to cancel a program. The
most recently entered program will then be deleted.
¡Up to 99 programs can be entered.
¡Playback from a desired track and random playback
are not available during program playback.
¡Program settings are cleared when the power is
turned off or the disc loading tray is opened.
ENTER
PLAY
CLEAR
2 5:02
4 4:35
3 1:22
4 4:35
5 3:49
6 3:05
7 4:18
3 1:22
1/12/3
CD [AUDIO] TOTAL 0:04:35
PROGRAM
ZOOM PLAYBACK
(enlargement on-screen)
Images can be enlarged on the screen to your taste.
1 Press the ZOOM button during playback.
¡
An image will be enlarged at the center of the screen.
¡Pressing the ZOOM button cycles the zooming
images in three steps.
VCDDVD-VDVD-RW
×4
×2×1.3
1
When the cursor (K/L/s / B) button is pressed
during zoom play, the part to be zoomed moves.
¡The zooming frame can be moved from the center 4
steps to the right, 4 steps to the left, 4 steps to the
top, and 4 steps to the bottom when 2 time zooming.
The frames will move 6 steps when 4 time zooming.
(In the 1.3-time zoom display, just one step can be
shifted up and down as well as right and left.)
¡Current position will be displayed on the right
bottom of the screen. Press the ENTER button, and
the display disappears.
Notes
¡
Zooming function does not work while disc menu is shown.
¡×4 zoom is not available on some discs.
¡For Video CDs, only 2 times zooming is available.
1
Press the MODE button in stop mode to display
the program setting screen.
DVD-A
2
Select a group using o/p buttons, then press
the ENTER button.
¡The track select screen will be displayed.
¡It takes approximately five
seconds until a track selection
screen appears.
3
Select a track using o/p buttons and press the
ENTER button.
¡To return to the group select screen from the track
select screen, press the RETURN button.
4
Press the PLAY button.
PLAYBACK OF ALL GROUPS
1
Press the MODE button
in stop mode to display
the all group screen.
2
Press the PLAY button.
DVD-A
PLAY
ALL GROUP PLAYBACK
- - no indication - -
DVD-AUDIO TOTAL 1:40:53
ALL GROUP
Notes
¡It may take time for all the respective track times to
be displayed.
¡The programmed content is retained until the power
is turned off or the tray is opened.
¡
During program playback, TITLE, MENU, Arrow and
ENTER buttons on the remote controller are disabled.
¡When the designated program playback ends, it
changes to stop mode.
1/11/2
DVD-AUDIO Total 00:04:35
PROGRAM
ENTER
PLAY
CLEAR
114 04:3552:43
2 45:02
3 41:22
4 34:35
5 13:49
6 33:05
7 24:18
3 41:22
1/12/3
1 Total 00:04:35
PROGRAM
ENTER
PLAY
CLEAR
114 04:3502:02
2 01:22
3 04:35
4 03:49
5 03:05
6 04:16
7 02:55
2 01:22
E5733UD.qxp 03.5.12 3:01 PM Page 20
