–
34
–
EN
1L25
BALANCE
When the volume level differs from each speaker,
adjustment can be made in the unit of dB, from -12 dB
to 0 dB.
Select the speaker to set by pressing o/p buttons, then
press the ENTER button
Select the volume level by pressing o/p buttons, then
press the ENTER button
¡TEST: The test tone is output in clockwise from
FRONT (L).
¡Selecting respective speakers outputs the test tone at
the volume presently set.
Note
¡When TEST is selected and the test tone is being
output, balance adjustment cannot be made.
¡When TEST is selected, no test tone will be output
from SUBWOOFER.
¡It is not possible to adjust this item for the speaker
that has been set to OFF in SPEAKER SIZE setting.
5
Press the SETUP button.
¡The setup mode will be cancelled and the ordinary
screen will appear.
(R)(L)
Center
Speaker
Sub-
Woofer
Surround (L) Surround(R)
The position to which it watches
and listens
The ideal position of the center speaker
Distance A
Distance C
Distance F
Distance S
Distance B
The ideal position of the
surround speaker
Distance A = Distance F - Distance C
Distance B = Distance F - Distance S
We are making the plan so that a user may set up
Distance A and B.
ABOUT A DELAY TIME
The delay effect is given to a voice output from a
center speaker and a surround speaker, and the ideal
viewing-and-listening position is discovered virtually.
As for a speaker, it is ideal to be arranged on a circle,
as shown in the following figure.
However, such arrangement may not be able to be
performed depending on your place.
It is possible to set up a delay time from the difference
in the position of an ideal speaker and the position of
an actual speaker.
ICON
LINE ENTER
RETURN
RETURN
AUDIO
TEST OFF
FRONT(L) 0 dB
CENTER 0 dB
FRONT(R) 0 dB
SUB WOOFER 0 dB
SURROUND(L) 0 dB
SURROUND(R) 0 dB
LANGUAGE
DISPLAY
AUDIO PARENTAL
ICON
LINE ENTER
RETURN
RETURN
AUDIO
TEST OFF
FRONT(L) 0 dB
CENTER 0d B
FRONT(R) 0 dB
SUB WOOFER 0 dB
SURROUND(L) 0 dB
SURROUND(R) 0 dB
0 dB
LANGUAGE
DISPLAY
AUDIO PARENTAL
E5733UD.qxp 03.5.12 3:02 PM Page 34