Mitsubishi Electronics WS-65411 Projection Television User Manual


 
19
19
Do not display the same stationary images on the screen for more than 15%
of your total TV viewing in one week. Examples of stationary images are
letterbox top/bottom bars from DVD or other video sources, side bars when showing standard
TV pictures on widescreen TV’s, stock market reports, video game patterns, station logos, web
sites, or stationary computer images. Such patterns can unevenly age the picture tubes causing
permanent damage to the TV. Please see pages 23 and 51 for a detailed explanation.
WARNING:
Connecting a DVD Player
DVD Player with Component Video
(Figure 1)
Connect the Component Video cables from
(YCb Cr or YPbPr) VIDEO OUT on the
back of the DVD player to COMPONENT-1
or COMPONENT-2 on the TV back panel,
matching the correct components:
1
Y to Y
2
Cb or Pb to Pb
3
Cr or Pr to Pr
Connect a set of audio cables from AUDIO
OUT on the back of the DVD player to
COMPONENT AUDIO Input 1 or 2 on
the TV back panel. The white cable
4
connects to the L (left)channel, and the
red cable
5
connects to the R (right)
channel.
See Appendix B, page 67, for component
video signal compatibility information.
For digital audio connections, see your
DVD and A/V receiver Owner’s Guides.
Connecting a DVD Player or S-Video Device
INPUT
2
1
AUDIO-
RIGHT
AUDIO-
LEFT/
(MONO)
VIDEO
S-VIDEO
AUDIO OUT
AUDIO IN
VIDEO OUT
(Y/C)
L
R
L
R
1
2
2
1
1
2
Any S-Video Device
INPUT
2
1
AUDIO-
RIGHT
AUDIO-
LEFT /
(MONO)
VIDEO
S-VIDEO
TV back panel
(Detailed View)
White
Red
White
Red
Other S-Video Device
(Figure 2)
1
Connect an S-Video cable from VIDEO OUT
on the device back panel to VIDEO INPUT-1
or INPUT-2 on the TV back panel.
2
Connect a set of audio cables from AUDIO
OUT on the device back panel to AUDIO
INPUT-1 or INPUT-2 on the TV back panel.
•The red cable connects to the R (right)
channel and the white cable connects to
the L (left) channel.
•If your S-Video Device is mono (non-
stereo), connect only the white (left) cable.
Connecting an S-Video
Device
Figure 2. Connecting S-Video Device.
Note: The TV back panel and connections shown
here are for reference only and may vary by
model.
COMPONENT
480i / 480P/ 1080i
AUDIO -
RIGHT
LEFT /
(
M
O
NO)
AUDIO -
2
Y
P r
Pb
VIDEO
S
Y
CB
CR
VIDEO OUT
BITSTREAM/PCM5.1 CH SURROUND 2CH
L
R
CENTER
SUBWOOFER SURROUND FRONT COAXIAL OPTICAL
AUDIO OUT
AC IN
MITSUBISHI
DVD PLAYER
MODEL
DD-5000
POWER SUPPLY 120V~ 60Hz
POWER CONSUMPTION 20W
MITSUBISHI DIGITAL ELECTRONICS
DISTRIBUTED BY
9351 JERONIMO ROAD
IRVINE, CA 92618
MADE IN JAPAN
AMERICA, INC.
SERIAL NO.
MANUF
ACTURED
5
4
TV back panel (Detailed View)
White
Red
White
Red
DVD back panel
2
1
1
3
5
4
2
3
Part ll: Installation
Figure 1. Connecting a DVD Player with Component
Video.