Mitsubishi Electronics PD-6150 Flat Panel Television User Manual


 
14
Menu Operations
The following describes how to use the menus and the
selected items.
1. Press the MENU/ENTER button on the remote control
to display the MAIN MENU.
SEL.
MENU/ENTER
OK
EXIT
EXIT
MAIN MENU
PICTURE
AUDIO
IMAGE ADJ.
SET UP
FUNCTION
SIGNAL INFO.
2. Press the ADJUST buttons ▲ ▼
and
on the remote
control to highlight the menu you wish to enter.
3. Press the MENU/ENTER button on the remote control
to select a sub menu or item.
SEL.
ADJ.
MENU/ENTER
OK
EXIT
RETURN
PICTURE
PICTURE MEMORY
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
NR
COLOR TEMP.
GAMMA
LOW TONE
SET UP LEVEL
COLORVIEW
FILM MODE
PICTURE MODE
: OFF
: OFF
: MEDIUM
: 2
: AUTO
: 0%
: ON
: NORMAL
G
R
4. Adjust the level or change the setting of the selected
item by using the ADJUST buttons
on the remote
control.
CONTRAST
10
5. The adjustments or the settings are stored in memory.
If neither the
or
button is pressed within 5 seconds,
the current setting is stored into memory and the
previous screen appears.
6. Repeat steps 2 – 5 to adjust an additional item, or press
the EXIT button on the remote control to return to the
MAIN MENU.
Note:
The main menu disappears by pressing the EXIT
button.
Menu Controls