Mitsubishi Electronics WD-62525 Projection Television User Manual


 
60
Chapter . . .
Media Command™ and Media Card Playback, continued
JPEG images cannot be edited through the TV.
Only name changes should be made on your PC
to avoid file incompatibility problems.
MP3’s must have at least 32 kHz sampling rate.
IMPORTANT
For MP3 or WMA7 Playlist Menu:
Figure 19
1. Press GUIDE to display the Playlist menu.
2. Using ADJUST or to move the highlight to
different tracks (CH up/down will change pages of
the Playlist).
3. Press PLAY to begin playback. The Playlist menu
will be taken down. An asterisk (*) will be next to the
song currently playing.
COMPATIBLE PICTURE OR AUDIO FILES:
For JPEG Pictures up to 128MB:
1. Still images recorded on digital cameras using the
Exchangable Image File Format, version 2.1 (EXIF
2.1) standard for digital still cameras and Design
Rules for Camera File Systems version 1.0 (DCF 1.0).
Some images opened and resaved on a computer
may not playback or may not be able to display a
picture in the thumbnail list because the computer
program that opened and resaved the images
changed the file to an incompatible format.
2. Standard digital images with a maximum size of
5-megapixels for each image, or 2560 x 1920 pixels.
Pictures will be scaled to the TV display. Some
pictures may be cropped to fit.
3. Full path file names can be no longer than 50
characters and must end in a .jpg extension. Not all
50 characters will display.
For MP3 or WMA7 Audio files:
1. Files recorded with sampling rates of 32 kHz, 44.1
kHz or 48 kHz.
2. Files recorded with fixed bit rates
3. File names with .mp3 or .wma extensions
NOTE: During MP3 or WMA7 audio playback,
audio from the cards will be sent to the A/V
receiver as analog audio. Digital out is not
available.
Media Setup Menu
Figure 20
Press DEVICE MENU at any time to display the Media
Setup screen, where you can adjust the Slideshow
Display, Frequency, Interval or Playlist Frequency.
For JPEG Picture Slideshow Setup
For JPEG picture Slideshow playback, select
Automatic or Manual advance. For manual
operation, press PLAY or ENTER on the remote
control to advance each slide.
For automatic advance, select the frequency
or number of times to show the complete slide
show, Once, Twice or Continuously.
For automatic advance, select the interval time
each slide is shown, for example, 5 seconds, or
30 seconds.
For MP3 or WMA7 Audio Playlist Setup
Select the frequency or number of times to
play the complete playlist. Once, Twice or
Continuously.
When you are finished, press DEVICE MENU on the
remote control to redisplay the media card screen or
press HOME to exit.
Figure 19. Audio Playlist
Figure 20. Media Setup Menu