Filter
Top Products
26
27
Remote Control Functions: Channel Selection, Sleep Timer
Channel Selection
Enter three numbers ( ex. for channel 2, press
002).
or
Press the channel number and ENTER (ex.
for channel 2, press 2, then ENTER).
or
Enter the channel number and wait four
seconds (without pressing ENTER). The TV will
change automatically.
Sleep Timer
(Figure 3 & 4)
Setting the Sleep Timer:
Press SLEEP on the remote control.
A message indicating the length of time the
sleep timer is to be set appears on the TV
screen.
Each press of SLEEP will increase the time
displayed by 30 minutes, until the maximum
value of 120 minutes is reached.
After 5 seconds of inactivity, the message will
disappear.
Press SLEEP to view the remaining time before
the timer turns the TV off.
Canceling the Sleep Timer:
Press the SLEEP button to display the
on-screen message.
Press SLEEP repeatedly until OFF is displayed.
After 5 seconds of inactivity, the message will
disappear.
Sleep: 30 min.
Figure 4. On-screen display for sleep timer
Note: Use the CANCEL button for digital
subchannel (-) selection in the
CABLE/DBS/DTV layer.
Figure 3. Sleep button on remote control
POWER
3
6
9
QV
1
7
SQV
4
SLEEP
2
5
8
0
TV
AUDIO
CABLE/DBS/DTV
DVD
VCR
Remote Control Functions: Channel Selection, Sleep Timer