Filter
Top Products
TV + Mitsubishi products that have A/V Network
terminals
_>Important:
The A/V Network is a special system that Mitsubishi developed to
make it easier to use many products with only one remote control.
When the supplied cable is connected between two Mitsubishi
products with the A/V Network, you can point the remote control at
one product and it will "pass" the remote control command to the
other.
equipment you will need
• One A/V network cable
(included with the TV)
procedure
O Connect one end of the AN network cable to the ACTIVE AN
NETWORK terminal on the back of the _¢'.
O Connect the other end of this cable to the ,.AN NETWORK IN
terminal on the back of a Mitsubishi component that has A/V
network terminals.
You can now use the television remote to control your VCR or
other Mitsubishi component. Point the remote directly at the
television. The A/V cable will "pass" the remote commands to
the component.
t
The method of connecting the A/V network can change, _pending
on which components you have and the way you plan to use your
equipment. More detailed information is contained in the owner's
guide of each particular Mitsubishi component.
36 Chapter 2: Connecting Your TV