Mitsubishi Electronics VS-50501 Projection Television User Manual


 
[_Important:
_Important:
Setting the clock (cont.)
[] Set the Clock
Auto clock: On
[_Day : Sunday
[] Time : 12:00 pm
[] Time zone: Central
[] Daylight
savings : Off
_-----'] ADJUST to select
ENTER to enter
1"_ MENU to go back
If you follow daylight savings
time, use the ADJUST buttons
to answer the question with
"On". Otherwise, answer "OFF'.
Press ENTER ....
The automatic clock set up is
completed. The screen will
return to the "First Time Setup"
menu.
The TV's clock will not be set until you tune you:r TV to a channel
that broadcasts the time via Extended Data Services (XDS). If
your TV loses power, you will need to tune to that channel again to
reset your clock. Most PBS stations broadcast the time setting
signal.
If you set "Daylight savings" to "On", your TV will adjust the clock
by one hour when daylight savings time begins and ends. This
automatic feature only works when your TV ha,_ selected a c]_annel
that sends the XDS time setting signal.
[] Set the Clock
[] Auto clock: Off
[] Day : - -
[] Time : .. : ....
_----'] ADJUST to select
ENTER to enter
MENU to go back
setting the clock yourself'
Use the ADJUST buttons or the
key pad to set "Auto clock" to
"OFF'. Press ENTER.
Use the ADJUST buttom,; to
select the ":D.ay". Press ENTER.
[] Set the Clock
[] Auto clock: Off
[] Day : Sunday
I J
[] Time : - - : ....
F_--_ADJUST to seiect
ENTER to enter
MENU to go back
Use the ADJUST buttons or
number buttons to set the
"Time".
After you have set the "Day"
and "Time", press the ENTER
button to start the clock. The
screen will return to the "First
Time Setup" menu.
[] Set the Clock
[] Day : Sunday
[]Time : 12:00 pm
r_ ADJUST to select
ENTER to enter
r_ MENU to go back
_,Important:
You can clear the time by
pressing the CANCEL butl:on
whea "Auto clock" is highlighted.
If you are receiving a VCR signal
on channel 3 or channel 4, the
automatic set_:ing may not work
correctly.
54 Chapter 3: Operating Your TV