Mitsubishi Electronics VS-50501 Projection Television User Manual


 
Adjusting the convergence
Your Mitsubishi Projection TV has three picture tubes and[ large
diameter lenses which are aligned to project light beams on the
screen. Each picture tube projects only one color; red, green or
blue.
This special feature allows you to finely tur.e the convergence at 5
positions if you think that the red and/or blue light beams are out
of alignment.
For the best picture, the beams should be a[igned at each of the 5
adjustment positions which appear on the screen. You carl perform
the following procedure whenever you think that the light beams
are out of alignment.
[] TV Main Menu
[] First Time Setup
[] Customize Display
[] Advanced Features
[] Select A/V Memory
_] ADJUST to select
ENTER to enter
MENU to exit menus
r_ Convergence
You can ad ust convergence
at 5 positions
on the screen.
ENTER to select Red or Blue.
ADJUST until the cross hairs
a ear white.
_II_EO to the next position.
I
ENTER to enter
r_3 MENU to go back
Red
0
0
o
0
0
Press the MENU button on the
remote control. The Main
Menu will appear on tile
screen.
Use the ADJUST buttons to
select "First Time Setup".
Press ENTER.
You wil:[ see the "First Time
Setup" s;creen. Use the AD-
JUST battons to select
"Convergence". Press ENTER.
You wil: see the "Convergence"
screen. Read the instructions
1;hat appear on the scr_!en.
Press tl=e enter button too
proceed
Press ENTER to select a color
to align and use the ADJUST
buttons to align the color you
selected (red or blue) with the
green lines. When they are
aligned, the green line will turn
white.
Next, use the VIDEO button
1;oselect the next position. Use
the adjust buttons to a].ign the
color. Adjust convergence at 5
positions using VIDEO and
ADJUST buttons.
58 Chapter 3: Operating Your TV