Mitsubishi Electronics WD-52527 Projection Television User Manual


 
Page 21
MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737
WD-65837 / WD-73837 / WD-82837
Lenticular Screen and Fresnel Lens Replacement
1) Place the Fresnel Lens on top of the Lenticular Screen with the labels facing outside as shown.
2) Install the HOLDER-SCREEN, top, bottom and sides as shown above.
3) Reverse the disassembly procedure to reassemble and install the screen frame assembly.
NOTE: The Lenticular Screen must face the front and the Fresnel Lens must face the rear.
LENTICULAR
SCREEN
FRESNEL
LENS
HOLDER-SCREEN
(TOP/BOTTOM)(SIDES)
HOLDER-SCREEN
LENTICULAR
SCREEN
LENS
Label Position
(Facing Outside)
FRONT
SCREEN REPLACEMENT 82” Models (continued)
Lenticular Screen and Fresnel Lens Disassembly
1) Remove the HOLDER-SCREEN from the top, bottom and sides.
2) Separate the Lenticular Screen and Fresnel Lens.