Filter
Top Products
MODELS: WD-52627 / 52628 / 62627 / 62628 / 62827 / 62927 / 73727 / 73827 / 73927
Page 25
Figure 8: PWB-DM Removal
PWB-DM Removal
Chassis Rear Shield Removal (Figure 7)
1) Remove 7 screw ( j )
2) Remove 2 nuts ( j1 )
3) Pull off Chassis Rear Shield.
PWB-DM Removal (Figures 8)
1) Remove 3 screws (k) holding the PWB-MICRO
Support Bracket.
2) Remove the Support Bracket.
3) Remove the five screws (m).
4) Remove the PWB-DM from the chassis.
Figure 7: Chassis Rear Shield