Filter
Top Products
MODELS: WD-52627 / 52628 / 62627 / 62628 / 62827 / 62927 / 73727 / 73827 / 73927
Page 31
10) Route wiring so that it does not snag
on support post.
12) Pull Optical Engine from cabinet. (Note:
Slight twisting motion may be required)
11) Disconnect PA1 and J3 connectors
and remove Engine-PWR-PWB
8) Remove CJ3 connector from Inter-
face PWB
52” & 62” OPTICAL ENGINE REPLACEMENT (Details)
7) Remove (3) screws from Interface PWB
CJ3
9) Remove (2) screws from Side Lock
PA1
J3