Mitsubishi Electronics WT - 42313 Projection Television User Manual


 
22
Chapter . . .
How Connections Affect the
PIP (Picture-In-Picture) and POP (Picture-Outside-Picture)
To see a picture in the PIP or POP, you may need to select an input source. If the only input connected
is ANT-A, then both the main picture and the PIP/POP will be from that input source. If other video
equipment is connected, you may be able to view these input sources as the PIP/POP. When connecting your
new Mitsubishi TV, it is important to understand which main picture and PIP/POP input sources can and
cannot be used together. The table on this page shows which inputs can and cannot be used together and the
limitations they may have. If you press the INFO button it will display the current Input, signal (i, p, or
i), format, time, day and sleep time.
See Operation of PIP and POP, page , for operating instructions.
PIP/POP
Main
Ant-A Ant-B DTV
480i, 480p
1080i
Input-1
Input-2
Input-3
Component(s)
(Comp. -1, -2
)
480i. 480p, 1080i
Ant-A OK* No PIP/POP OK OK OK
Ant-B OK OK* OK OK OK
DTV
480i, 480p, 1080i
OK OK OK** OK OK
Input-1
Input-2
Input-3
OK OK OK OK** OK
Component(s)
(Comp-1, -2
)
480i, 480p, 1080i
OK OK OK OK OK**
MonLink/DVI OK OK OK OK OK
* No Side-by-Side with the same channel
**No Side-by-Side with the same input
† Component 2 is not available on the WT-42313