Mitsubishi Electronics WT - 42313 Projection Television User Manual


 
38
39
SETUP Menu: Energy Mode (WS-, WS-,
WS-)
Energy Mode
(Figure 19)
This feature is only for models WS-, WS-
and WS-. Change the setting to Low (less than
 watt) and the TV will operate in an energy saving
mode when it is turned off.
If the Energy Mode is set to Low, it will not be
possible to record while the TV’s power is off because
there will be no signal from LOOP OUT (on the
TV back panel) to the VCR and/or cable box.
NOTE: The Standard setting has a faster turn on
time, but uses more power than the Low setting.
Standard is recommended.
ENTER for menu or to start
MENU to return

 
 


  

 





Figure 19. Energy Mode for WS-48313, WS-55313,
WS-65313