English
Power Cord
2-2. Connecting the signal cable
NOTE
• Be sure that the power switches of both the PC and the monitor are OFF.
1. Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
Signal Cable Connector PC
Signal Cable (MD-C87/100
enclosed)
Video Output
Connector / D-Sub mini
15 pin
Input Connector
(monitor) / D-Sub mini
15 pin
• Standard graphics card
• Power Macintosh G3 (Blue &
White) / Power Mac G4
Signal Cable (MD-C87/100
enclosed) + Adapter*
Video Output
Connector / D-Sub 15
pin
Input Connector
(monitor) / D-Sub mini
15 pin
• Macintosh
*Macintosh Adapter (Optional)
Signal Cable (FD-C16
enclosed)
Video Output
Connector / D-Sub mini
15 pin
Input Connector
(monitor) / DVI
• Standard graphics card
• Power Macintosh G3 (Blue &
White) / Power Mac G4
Video Output
Connector / D-Sub 15
pin
Input Connector
(monitor) / DVI
• Macintosh
*Macintosh Adapter (Optional)
Signal Cable (FD-C16
enclosed) + Adapter*
2. CABLE CONNECTION
13