English
WARNING
The equipment must be connected to a grounded main
outlet.
Not doing so may cause in fire or electric shock. Not doing so
may cause in fire or electric shock.
5. Turn on the monitor's power button and then switch on the PC's
power.
The monitor’s power indicator will light up (blue).
If an image does not appear, refer to the “TROUBLESHOOTING” (p.36) for
advice.
Whenever finished, turn off the PC and the monitor.
NOTE
• When turning on the monitor, the kind of the input signal (Signal1 or 2/Analog or
Digital) is displayed for a few seconds on the right top corner of the screen.
• Adjust brightness of the screen depending on the brightness of your environment.
• Be sure to take adequate rests. A 10-minute rest period each hour is suggested.
6. When using the software, ScreenManager Pro for LCD (for
Windows), connect the upstream port of the monitor to the
downstream port of the USB compliant PC or another hub with the
USB cable.
After connecting the USB cable, the USB function can be set up automatically. For
further details about the “ScreenManager Pro for LCD”, refer to the readme.txt in
the CD-ROM.
2. CABLE CONNECTION
15