NEC 50XM6 Flat Panel Television User Manual


 
En-32
Enabling/disabling the front panel controls
This function enables/disables the front panel controls.
Example: Setting ON
On CONTROL LOCK of OPTION3 menu, select
ON, then press the MENU/ENTER button.
SEL. ADJ. RETURN
OPTION3 3 / 4
PREVIOUS PAGE
TIMER
PWR. ON MODE
CONTROL LOCK
IR REMOTE
LOOP OUT
REMOTE ID
ID NUMBER
VIDEO WALL
NEXT PAGE
: ON
: ON
: OFF
: ALL
: ALL
EXIT
Information
CONTROL LOCK settings
ON: Disables the buttons on the front panel.
OFF: Enables the buttons on the front panel.
* Even when the CONTROL LOCK is set, the POWER
switch will not be locked.
* This becomes effective when the on-screen menu goes
out.
Setting the power on mode
This function sets the input mode and the sound volume
at the time the power is switched on.
Example: Setting the input mode to VIDEO2
On OPTION3 menu, select PWR.ON MODE , then
press the MENU/ENTER button.
The PWR.ON MODE screen appears.
On INPUT of PWR.ON MODE menu, select
VIDEO2.
The available inputs depend on the setting of input.
SEL. ADJ. RETURN
EXIT
PWR. ON MODE
INPUT
VOLUME
: VIDEO2
: LAST
Information
INPUT settings
LAST: Last mode (the input that was last selected at
the time the power was switched off).
VIDEO1, 2, 3: VIDEO input mode.
RGB1, 2, 3: RGB input mode.
DVD/HD1, 2: DVD/HD input mode.
MULTI: Multi screen mode.
Follow the procedure used for PROGRAM TIMER. See
page En-31.
PICTURE IN PICTURE SIDE BY SIDE
VOLUME settings
LAST: Last mode (the volume that was last selected at
the time the power was switched off).
0 to 42: The level of sound volume.
SEL. ADJ. RETURN
PWR. ON MODE
MULTI SCREEN SETTING
MULTI MODE
: SIDE BY SIDE1
INPUT MODE
LEFT
RIGHT
: DVD/HD1
: VIDEO1
EXIT
SEL. ADJ. RETURN
PWR. ON MODE
MULTI SCREEN SETTING
MULTI MODE
: BOTTOM LEFT
INPUT MODE
MAIN
SUB
: DVD/HD1
: VIDEO1
EXIT
The REPEAT TIMER screen appears.
Adjust the items.
Use the
and
buttons to select SINGLE.
Use the and buttons to select the item, then press the
and
buttons to set.
SEL. ADJ. RETURN
1 WORK TIME
INPUT MODE
2 WORK TIME
INPUT MODE
: 00H10M
: VIDEO1
: 00H15M
: DVD1
EXIT
REPEAT TIMER
: SINGLE
REPEAT TIMER
Information
REPEAT TIMER function
* The two repeat timers run consecutively, i.e., Timer 1-
Timer 2-Timer1-Timer2.
* This becomes effective when the on-screen menu goes
out.
SINGLE settings
WORK TIME: Set the time duration of the display.
Time range is from 1 minute to 24 hours.
INPUT MODE: Set the signal that will be displayed.
* Set the DIVIDER OFF and ID NUMBER ALL
before the operation.
MULTI settings
MODE: Select the input mode to be displayed from
SINGLE, S BY S1~3 and PICTURE IN
PICTURE (BTM LFT~TOP LFT).
WORK TIME: Set the time duration of the display.
Time range is from 1 minute to 24 hours.
INPUT MODE: Set the signal that will be displayed.
Select MAIN or SUB for PICTURE IN PICTURE
(BTM LFT~TOP LFT) and LEFT or RIGHT for
S BY S1~3.
Only one signal is selected for SINGLE.
SEL. ADJ. RETURN
REPEAT TIMER
1 MODE
WORK TIME
INPUT MODE
MAIN
SUB
2 MODE
WORK TIME
INPUT MODE
LEFT
RIGHT
: BTM LFT
: 04H00M
: RGB1
: VIDEO1
: S BY S1
: 02H30M
: RGB3
: DVD1
EXIT
: MULTI
REPEAT TIMER
* Set the DIVIDER OFF and ID NUMBER ALL
before the operation.
VIDEO WALL settings
DIVIDER: Divide the screens into 1, 2ן2 or 3ן3
sections.
WORK TIME: Set the time duration of the display.
Time range is from 1 minute to 24 hours.
INPUT MODE: Set the signal that will be displayed.
* Turn on the AUTO ID and set the DIVIDER (at 1, 2ן2
or 3ן3) before the operations.
* In the case of Video Wall, timer No.1 can be used to
control all the displays simultaneously.
REPEAT TIMER
SEL. ADJ. RETURN
1 DIVIDER
WORK TIME
INPUT MODE
2 DIVIDER
WORK TIME
INPUT MODE
: 1
: 00H03M
: VIDEO1
: 2ן2
: 00H06M
: RGB1
EXIT
REPEAT TIMER
: VIDEO WALL