Filter
Top Products
En-37
Switching the input source quickly
This feature enables quick input selection.
After setting ON, press the CLEAR/SEAMLESS SW
button for quick switching between the two selected input
signals.
Example: Set to switch quickly between RGB1 and
RGB2.
On “SEAMLESS SW” of “OPTION4” menu, select “ON”.
Select “RGB1” and “RGB2”.
SEL. ADJ. RETURN
OPTION4 4 / 4
PREVIOUS PAGE
SUB. PICTURE
ZOOM NAV
PIC FREEZE
SEAMLESS SW
SELECT1
SELECT2
TEXT INSERT
: BTM LFT
: S BY S1
: ON
: RGB1
: RGB2
: OFF
EXIT
* The available sources depend on the setting of input.
Information
Ⅵ SEAMLESS SW Function
* This feature will not function for certain input
combinations. See the table on page En-16.
* After switching to the selected input, please operate this
function.
* This feature will not function during split screen mode.
* When SEAMLESS SW is first turned on, or when
signals being transmitted are changed, there may be a
slight delay due to signal analysis.
Ⅵ SEAMLESS SW settings
OFF: Turns off the SEAMLESS SW function.
ON: When the CLEAR/SEAMLESS SW button is
pressed, input signals will switch quickly according to
the setting of SELECT1 and SELECT2.
RGB1
RGB1
RGB1
RGB1
RGB1
RGB1
Side-by-Side Picture-in-Picture
SELECT/
FREEZE
button
SELECT/
FREEZE
button
S BY S1
RGB1
RGB1
or
S BY S2
Displaying the information as a text
Example: Setting “TEXT INSERT” to “BOTTOM-3”,
“INPUT” to “RGB1”, “SUB. P DETECT” to “AUTO”,
“PIC. RATE” to “100%” and “DISPLAY” to “NORMAL”
On “TEXT INSERT” of “OPTION4” menu, select
“BOTTOM-3”, then press the MENU/ENTER button.
The “TEXT INSERT” screen appears.
Adjust the items.
Information
Ⅵ TEXT INSERT setting
OFF: Displays no text.
BOTTOM-1/BOTTOM-2/BOTTOM-3/MID.LOW/
MID.HIGH/TOP-3/TOP-2/TOP-1/LEFT/RIGHT:
Displays a text at the specified location, where the
subscriptions -1, -2 and -3 indicate the height of the
text area.
Ⅵ INPUT setting
Sets the input of the text to the RGB1 to 3.
Ⅵ SUB. P DETECT setting
AUTO: Black frame with no signal input disappears 3
seconds after the input signal is lost.
OFF: Black frame with no signal input is displayed
consistently.
Ⅵ PIC. RATE setting
Sets the transparency of the text.
Ⅵ DISPLAY setting
NORMAL: The sub screen is displayed consistently.
FADE: The sub screen fades in.
SEL. ADJ. RETURN
TEXT INSERT
INPUT
SUB. P DETECT
PIC. RATE
DISPLAY
: RGB1
: AUTO
: 100%
: NORMAL
EXIT
Enhanced split screen Model