NEC NDV-27 DVD Player User Manual


 
21
Initial Settings
Initial Settings
(continued)
Password (Security Code)
You can create or change password.
1. Select Password on the LOCK menu then press B. The “Change” is
highlighted
2. Press ENTER then the password window will appear.
3. To make a new password:
When the “New Password” section is highlighted, enter a 4-digit
password using the numbered buttons then press ENTER. Enter the
4-digit password again to verify when the “Confirm Password”
section is highlighted, then. The “OK” will be highlighted.
To change the password:
When the “Old Password” section is highlighted, enter the 4-digit
password you have created then press ENTER. The“New Password”
section will be highlighted. Enter a new 4-digit password using the
numbered buttons then press ENTER. Enter the new 4-digit security
password again to verify when the “Confirm Password” section is
highlighted. The “OK” will be highlighted.
4. Press SETUP to exit the menu.
If you forget your Security Code
If you forget your security code you can clear it using the following
steps:
1. Remove any disc from the unit and close the disc tray.
See that “nodISC” is displayed on the display window.
2. Press SETUP and setup menu apears on the TV screen.
Use the numbered buttons to enter the 6-digit number “210499”.
See that “P-CLr” is displayed on the display window.
3. Enter a new password as described above.
Area Code
Enter the code of the area whose standards were used to rate the DVD
video disc, based on the list in the reference chapter.
1. Select “Area Code” on the LOCK menu then press B.
2. Select the first character using v / V buttons.
3. Shift the cursor using B button and select the second character using
v / V buttons then press ENTER, the password window will appear
4. Press ENTER, the password window will appear.
5. If you have not entered password yet:
When the “New Password” section is highlighted, enter a 4-digit
password using the numbered buttons then press ENTER. Enter the
4-digit security password again to verify when the “Confirm
Password” section is highlighted. The “OK” will be highlighted.
If you have entered password already:
Enter a 4-digit password you have entered using the numbered
buttons. The “OK” will be highlighted.
6. Press ENTER to confirm your Area Code selection, then press SETUP
to exit the menu.
DVD