22
Before Operation (Continued)
Factory Setting
If you need to, you can reset the recorder to all its facto-
ry settings. Select ‘SET’ icon then press ENTER.
ote
Some options can not be reset. (Movie Rating, Set Password,
and Country Code)
LANGUAGE
Display Language
Select a language for the Setup menu and on-screen
display.
Disc Language
Select a language for the disc’s Menu, Audio, and Subtitle.
- Original: The original language set for the disc is
selected.
- Other: To select another language, select Other
option then press ENTER. Use the numbered
and ENTER buttons to key-in the correspon-
ding 4-digit number according to the lan-
guage code list on page 58. If you a mistake
before pressing ENTER, press b repeatedly
to delete one by one and correct it.
AUDIO
Each DVD disc has a variety of audio output options.
Set the recorder’s Audio Output according to the type of
audio system you use.
Dolby Digital
PCM: Select when connected to a 2-channel digital stereo
amplifier. The Recorder’s digital audio outputs sounds in
the PCM 2ch format when you play a DVD video disc
recorded on the Dolby Digital recording system.
Bitstream: Select “Bitstream” if you connected the
Recorder’s DIGITAL OUT jack to a Dolby Digital
decoder (or an amplifier or other equipment with a
Dolby Digital decoder).
DTS
OFF: If you select “OFF”, the DTS signal is not output
through the DIGITAL OUT jack.
Bitstream: Select “Bitstream” if you connected the
Recorder’s DIGITAL OUT jack to a DTS decoder (or an
amplifier or other equipment with a DTS decoder).
MPEG
PCM: Select when connected to a 2-channel digital
stereo amplifier. The DVD Recorder’s digital audio out-
puts sounds in the PCM 2ch format when you play a
DVD video disc recorded on the MPEG2 recording
system.
Bitstream: Select “Bitstream” if you connected the DVD
Recorder’s DIGITAL OUT jack to a MPEG decoder (or
an amplifier or other equipment with a MPEG decoder).
Sampling Freq.
Sampling Freq.
Sampling Freq.
