23
Before Operation (Continued)
Sampling Frequency
If your receiver or amplifier is NOT capable of handling
96 kHz signals, select 48 kHz. When this choice is
made, this unit will automatically convert any 96 kHz
signals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling
96 kHz signals, select 96 kHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
DRC (Dynamic Range Control)
With the DVD format, you can hear a program’s sound-
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set
DRC to ON for this effect.
Vocal
Set Vocal to ON only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
LOCK (Parental Control)
Set Password
To access the Movie Rating, Set Password and Country
Code features, you must enter a 4-digit security pass-
word.
11
Press SETUP.
The Setup menu appears.
22
Use v / V to select the LOCK option.
33
While the LOCK option is selected, press B to
move to the second level.
44
Use v / V to select the Set Password option.
55
Press B to move to the third level.
66
When you have not entered a password yet;
Enter a 4-digit password using the numbered but-
tons to create a personal 4-digit security password.
Enter the 4-digit password again to verify.
When you have already entered a password;
You can change or delete the password.
Use v / V to select “Change” or “Delete” then press
ENTER.
Change : Enter a 4-digit password using the num-
bered buttons to confirm the personal 4-digit securi-
ty password, then enter a 4-digit new password
twice.
Delete : Enter a 4-digit password using the num-
bered buttons to confirm the personal 4-digit securi-
ty password.
ip
If you make a mistake, press b repeatedly to delete
password numbers one by one then correct it.
If you forget your 4-digit code
If you forget your password, to clear the current pass-
word, follow the procedure below.
1. Press SETUP to display the Setup menu.
2. Use the Number buttons to enter the 5-digit number
“21019”.
3. Select “Yes” then press ENTER. The 4-digit pass-
word is cleared. Enter a new code as shown above.
48KHz
96KHz
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Vocal
OFF
ON
Setup
Language
Audio
Lock
Recording
Disc
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Vocal
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Vocal
OFF
ON
Change
Delete
Movie Rating
Set Password
Country Code
New
Password
0-9 Input
HOOKUP