Filter
Top Products
English-9
Channel Edit
This feature allows you to select which channels in memory
are tuned when using CH + or CH- buttons.
1. On the “Tuner” menu page, press
button to select
“Channel Edit” and press SET button to display the list of
memorized channels. Press SET button again to enter the
channel list.
2. Press
button to select each channel in the list. Pressing
SET button on a checked channel will remove it from the list
(skip), while pressing SET button on an unchecked channel
will add it to memory.
NOTE:
When IP channels are listed, the setup IP adress is displayed beside the channels.
Menu Language
This function selects OSD menu Language.
1. On the “Configuration” menu page, press
button to
select “Menu Language” and press SET button.
2. Press
button to select OSD Menu Language and press
SET button to apply.
Time Zone
This function selects the Time Zone and D.S.T. (Daylight
Saving Time) settings.
1. On the “Configuration” menu page, press
button to
select “Time Zone” and press SET button.
2. Press
to highlight “Time Zone” and press SET button.
3. Press
to select the “Time Zone” and press SET button.
4. Press
to highlight “D.S.T.” and press SET button.
5. Press
to select the “D.S.T.” and press SET button.
Parental Control
Parents can block certain types of programming based on
the rating and content.
NOTE: This function is protected by a password.
1. On the “Configuration” menu page, select “Parental
Control” and press SET button.
2. Enter your password. The default password is “0000”. Then
select “OK” and press SET button. There are three sub-
menus are listed.
(1) U.S. TV Rating
(2) MPAA
(3) RRT(Region Rating Table)
NOTE: RRT is the Region Rating Table downloadable function.
3. Select ”U.S. TV Rating”, “MPAA” or “RRT”, and press SET
button. Then you will see the U.S. TV Rating system, MPAA
system or Region Rating Table.
4. Press
-+ buttons and SET button to activate the
appropriate restrictions.
NOTE: Blocking one type of programming will automatically block all higher rated
programming also, however it is possible to unlock this programming while
keeping the desired programming blocked.