Filter
Top Products
Introduction
The MS-1 is a miniature IR sensor designed for use with the
Niles Infrared Repeating systems.
Installed in a remote room location, the MS-1 receives the IR
commands transmitted from your existing hand-held
remotes in that room. The commands are carried via a small
2-conductor shielded cable to your A/V equipment in anoth-
er room, and instantly "repeated".
The MS-1 is compatible with all current Niles infrared
systems. It may be used along with, or as an alternative to,
the Niles IRR4D+, IRR4S+, SCW-UIR, MS-2, TIR1+ and MS360
IR sensors.
The MS-1 is just one part of the three building blocks neces-
sary to complete a Niles IR repeating system:
● Main System Unit—IntelliControl
™
, RVL-6, IRP2+, IRP6+,
IRZ6+.
● IR Sensors—Models IRR4D+, IRR4S+, SCW-UIR,
TIR1+, MS-1, MS-2 and CMS-3.
● IR Flashers—Models IRC-1 and IRC-2.
An expansion unit, Model XRP6+, is available for IR repeater
systems requiring control in more than six rooms.
TABLE OF CONTENTS
Introduction 1
Features and
Benefits 2
Installation
Considerations 3
Installation 9
Operation 11
Trouble-
shooting 12
Specifications 14
M
INIATURE
I
NFRARED
S
ENSOR
MS-1
MicroSensor
TM
Miniature
IR Sensor